This tour is in productionQMSQMS: Quality Management System
Non-conformance to corrective action.
Technical disposition, corrective action and effectiveness review before closure where applicable.
- Status
- Coming soon
- Tour type
- Workflow
- Operating area
- Completions, Quality & Handover
About this tour
The walkthrough follows a non-conformance from inspection-plan reference through technical disposition, corrective action and effectiveness review before closure where required.
Workflow: A governed sequence from initiation to closure, showing the controls applied at each stage.
What this tour will cover
- Non-conformance raised against the applicable inspection and test plan
- Disposition made by an authorised technical role
- Effectiveness review between corrective-action completion and closure
Relevant industries
Inside QMS
Executive workspace.
A representative QMS interface used in this walkthrough.
More in Completions, Quality & Handover
All tours- Application overviewThe completion chain from inspection record to handover certificateGate release depends on completed deliverables and required evidence, not on a percentage alone.Open
- AdministrationConfiguring a completions projectThe certificate sequence is established for the project and then controlled against the approved configuration.Open
- WorkflowSpares, transmittals and the digital handover recordThe receiving organisation can see what was transferred and the evidence that confirms receipt.Open
Where this sits
Completions, Quality & Handover
Demonstrate completion and hand over the asset with governed engineering information.
See QMS in a working session using representative records.
A working session with your register, project or asset on screen, alongside the people who keep it.
